Designed for coil-to-coil operation, the machine brings stainless steel coil up to a uniform No.4 satin finish without intermediate handling. Coated-abrasive belts do the cutting, levelling the surface in defined steps before any finishing station takes over. No.4 satin gives a uniform directional grain that hides handling marks better than a bright finish.
The working section is configured with No.4. The working envelope also covers abrasive belt width at Depending on the sheet width, so the surface stays within tolerance across the batch.
What This Machine Does
This grinding machine is configured for No.4 satin finish on stainless steel coil. The grinding section sets the base surface; what follows only refines it to No.4 satin.
Line speed is set at 6-25M/min, depending on the finish required.
This build runs to speed of the line 6-25M/min and abrasive belt width Depending on the sheet width, with system Wet roller grinding and roller dimensions 300mm.
Machine Features
- Oil-type grinding carries the swarf away and keeps the abrasive cool, giving a cleaner surface on long runs.
- Drive is by inverter-controlled motors, letting speed follow the grade being run.
- The bed is ground flat after welding, which is what keeps thin gauge material from marking.
- Abrasive tracking is automatic, which stops belt wander from showing up as an edge defect.
Where It Is Used
- door frames and architraves
- shopfitting and display units
- coil processors supplying cut-to-length
- appliance panels and housings
Packing & Delivery
Shipped in export packing, secured in container. Lead time is 30 days after deposit; commissioning and training are available on site.
FAQ
What support comes after delivery?
Commissioning, operator training and spare parts supply are all provided. Wear parts are catalogue items, and drawings are supplied so consumables for this stainless steel coil line can be sourced locally.
What sets the throughput of this machine?
Throughput follows the number of working stations, the width being processed and how far the surface has to be taken — reaching No.4 satin takes more passes than a coarse grind. The specification table above gives the working speed for this machine.