The machine takes stainless steel sheet through a controlled buffing sequence and delivers a uniform No.4 satin finish. Compound application is metered per station, holding a consistent No.4 satin along the full length of the workpiece. No.4 satin gives a uniform directional grain that hides handling marks better than a bright finish.
Installed power is 150. The working envelope also covers plate width at 1250, so the surface stays within tolerance across the batch.
Machine Overview
This buffing machine is configured for No.4 satin finish on stainless steel sheet. Buffing stations follow the grinding heads, using compound-loaded wheels to bring out No.4 satin.
It handles work up to 6000 MAX long.
This build runs to plate thickness 0.4~4.0 and length of sheet 6000 MAX, with plate width 1250 and the total power unit 150.
Features
- The frame is stress-relieved before machining, which keeps the working heads in alignment under load.
- Guard interlocks are wired to the main isolator, so opening a guard stops the station rather than just alarming.
- Coated abrasive belts give a controlled, repeatable cut and are changed in minutes rather than hours.
- Emergency stop and overload protection are wired into every station, not just the main drive.
Common Uses
- appliance panels and housings
- panel manufacturers
- commercial kitchen equipment and countertops
- ventilation and duct components
Packing & Delivery
Shipped in export packing, secured in container. Lead time is 30 days after deposit; commissioning and training are available on site.
FAQ
What grades of stainless steel can this buffing machine handle?
The austenitic and ferritic grades used for surface-critical stainless steel sheet work run through it — 304, 316, 430, 439 and 445 among others. The abrasive sequence is matched to the grade, so mixed batches can be run without changing hardware.
How is the No.4 satin kept consistent from batch to batch?
Every station holds its own set pressure and speed, and those values are stored as a recipe. Once a grade and gauge are dialled in for No.4 satin, the next run of the same specification is called up rather than set again by hand.